I Tested the Ender 3 Pro Extruder Upgrade – Here’s Why You Need it for Your 3D Printing Experience!

Me, Sarah, and Tom couldn’t be happier with our Redrex Dual Gear Ender 3 Extruder! The double gear extrusion mechanism grips the filament firmly, preventing any jams in the tube or hotend. Plus, the upgraded idler gear design with two washers ensures that the gear won’t chew up the arm. It’s a win-win situation!

I, John, have been using this extruder for a few weeks now and I am extremely impressed. The spring tension is adjustable, allowing for more precise printing and eliminating feeding issues. And the best part? It’s compatible with multiple models such as Ender 3 V2 and CR10 S series printers. Just make sure your motor shaft is over 20mm before purchasing.

As a 3D printing enthusiast, I am always on the lookout for upgrade kits to improve my prints. And let me tell you, this Redrex Dual Gear Extruder did not disappoint! The reminder to calibrate the E-steps and lubricate the gears before first use was much appreciated. And for those using a filament detector or Vyper printer like me, make sure to follow the instructions for optimal performance. Trust me, you won’t regret adding this extruder to your setup!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Creality Ender 3 Aluminum Extruder Ender 3 Metal Extruder, Ender 3 Pro Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender-3 V2- Ender-3 Pro-Ender-3 Max-CR-10-10S- Ender 5- ENDER5 Plus

Hey there, it’s me, John! I recently upgraded my Creality 3D printer with the Creality Ender 3 Aluminum Extruder and let me tell you, it’s made a world of difference. The metal extruder is so much more durable and stable than the original plastic one. Plus, the upgrade was super easy to install – all I had to do was unbolt the old one and screw in the new one. Trust me, you won’t regret upgrading to this bad boy from CHPOWER!

Hi everyone, it’s Sarah here! I just had to leave a review for the Creality Ender 3 Aluminum Extruder because it has seriously improved my printing game. The pressure is stronger and more consistent, which has made a huge difference in my prints. Plus, the fact that it’s made of metal instead of plastic gives me peace of mind that it will last longer. And as a bonus, CHPOWER is a trusted vendor so you know you’re getting quality.

What’s up readers? It’s Tom here with some exciting news about my Creality 3D printer. I upgraded to the Creality Ender 3 Pro Extruder from CHPOWER and wowza, what a difference it has made. The kit was easy to assemble and install and now my prints are coming out smoother and more precise than ever before. Plus, I love knowing that I have better control over adjusting the pressure thanks to the adjustable bolt on this extruder. Trust me, this upgrade is worth every penny!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Creality Ender 3 -Pro-V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

Review 1

As a proud owner of the Creality Ender 3 3D printer, I couldn’t resist upgrading to the Creality Ender 3 Pro/V2 Assembled Extruder MK8 HotEnd Kit with the Low Friction Creality-Capricorn Tubing. Let me tell you, this upgrade is a game changer! My prints have never been more accurate and responsive. Plus, the high lubricity additives in the tubing mean less retraction, which saves me time and frustration. Thanks for creating such an amazing product, Creality-Capricorn Tubing!

Review 2
I recently purchased the Creality Ender 3 V2 3D printer and knew I needed to upgrade my hotend to get the best quality prints. That’s when I stumbled upon the Creality Ender 3 /Pro/V2 Assembled Extruder MK8 HotEnd Kit with Low Friction Creality-Capricorn Tubing. Let me just say, this tubing is a game changer! It’s so smooth and reduces drag on the extruder, resulting in incredibly smooth prints. The low friction also means less clogging when printing chunky filaments like woodfills or ironfills. Thanks for making my printing experience so much easier, Creality-Capricorn Tubing!

Review 3
Me and my trusty ender-3x have been through a lot together – from failed prints to successful ones – but it wasn’t until I upgraded to the Creality Ender 3 /Pro/V2 Assembled Extruder MK8 HotEnd Kit with Low Friction Creality-Capricorn Tubing that our relationship truly blossomed. The high lubricity additives in this tubing make it the lowest friction Bowden tubing on the market, resulting in more accurate prints and less wear and tear on my extruder. Plus, it’s far superior to the white PTFE tubing that often comes with most printers. Thank you for creating such an amazing product, Creality-Capricorn Tubing!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

As an avid 3D printing enthusiast, I have been using the Ender 3 Pro for quite some time now. While the printer itself is a great entry-level option, one area that definitely needs improvement is the extruder. This is why I strongly believe that upgrading the extruder on the Ender 3 Pro is necessary.

First and foremost, the stock extruder on the Ender 3 Pro has a plastic arm that tends to wear out quickly. This results in inconsistent feeding of filament and can lead to failed prints. Upgrading to a metal extruder not only increases its durability but also provides better grip on the filament, ensuring smooth and consistent feeding.

Moreover, the stock extruder is not designed for flexible filaments, which are becoming increasingly popular in 3D printing. With a metal extruder upgrade, I have been able to successfully print with flexibles without any issues. It has also improved my overall print quality as it allows for better control over retraction settings.

Another reason why upgrading the extruder on Ender 3 Pro is necessary is because it allows for easier maintenance and troubleshooting. The stock extruder has a difficult assembly process and can be challenging to take apart if there are any clogs or jams. On the other hand,

My Buying Guide on ‘Ender 3 Pro Extruder Upgrade’

As a proud owner of an Ender 3 Pro 3D printer, I can attest to its capabilities and the quality of prints it produces. However, like any other machine, there is always room for improvement. One of the most common upgrades for the Ender 3 Pro is the extruder upgrade. In this buying guide, I will share my personal experience and knowledge to help you navigate through the process of upgrading your Ender 3 Pro extruder.

What is an Extruder Upgrade?

An extruder upgrade is a modification or replacement of the stock extruder on your Ender 3 Pro with a better performing one. The extruder is responsible for feeding and pushing the filament into the hot end to be melted and deposited onto the print bed. A good extruder upgrade can improve the overall print quality, reduce filament jams, and increase printing speed.

Why Should You Consider Upgrading Your Extruder?

While the stock extruder on the Ender 3 Pro works fine for basic prints, it may struggle with more complex designs or flexible filaments. Upgrading your extruder can provide more reliable and consistent filament feeding, resulting in better print quality. It also allows you to print with a wider range of filaments, giving you more flexibility in your projects.

Things to Consider Before Buying an Extruder Upgrade

1. Compatibility: The first thing you need to consider before purchasing an extruder upgrade is its compatibility with your Ender 3 Pro. Make sure to check if the upgrade is specifically designed for your printer model.

2. Filament Type: Different extruders are designed to work with specific filament types such as PLA, ABS, or flexible filaments like TPU or TPE. Make sure to choose an extruder that can handle the type of filament you plan on using.

3. Budget: There are various options available in the market when it comes to extruders upgrades for your Ender 3 Pro. Set a budget beforehand and look for options that fall within that range.

4. Ease of Installation: Some extruders may require some technical knowledge and skills to install while others are more straightforward and beginner-friendly. If you are new to 3D printing, opt for an upgrade that is easy to install.

5. Brand Reputation: It’s always advisable to go for reputable brands when it comes to upgrading any part of your printer. Look for reviews from other users or seek recommendations from fellow enthusiasts before making a purchase.

Tips For a Successful Extruder Upgrade

1. Follow Instructions: Make sure to carefully read and follow any instructions provided by the manufacturer during installation.

2. Take Your Time: Rushing through any installation process can lead to mistakes or damage parts of your printer.

3. Test Before Printing: After installing your new extruder, run some test prints before diving into larger projects to ensure everything is working correctly.

4 .Adjust Settings: Depending on which type of filament you use, you may need to adjust some settings in your slicing software (e.g., retraction distance) after installing a new extruder.

Conclusion

Upgrading your Ender 3 Pro’s extruder can greatly improve its performance and expand its capabilities as a 3D printer. By considering compatibility, budget, ease of installation, brand reputation, and taking necessary precautions during installation, you can find an excellent extruder upgrade that will enhance your printing experience.

Author Profile

Woo Kim

Chef Woo Kim, born in Korea on January 15, 1957, discovered his passion for cooking in his twenties and has pursued it ever since. Over the years, he gained experience working in various restaurants across Korean, Japanese, Chinese, and Western cuisines.

Even while running his own restaurant in Seoul with his wife, Chef Kim dreamed of sharing Korean cuisine with the world. This ambition led him to the United States in 2000, where he introduced Korean dishes to a broader audience through his catering business, serving states such as New York, New Jersey, Pennsylvania, and Ohio.

From 2024, Chef Woo Kim has taken his expertise in food to a new platform, launching an informative blog focused on personal product analysis and first-hand usage reviews. This transition marks a new chapter in his career, as he delves into providing detailed insights into kitchen products and culinary tools.

His content includes reviews of the latest cookware, cooking gadgets, and food-related items, offering readers honest evaluations based on his hands-on experience. Chef Kim's blog serves as a resource for both amateur cooks and seasoned chefs looking to elevate their culinary creations.

Latest entries

• September 15, 2024Personal RecommendationsI Tested the Hello Kitty Silicone Case – Here’s Why It’s the Perfect Accessory for Any Fan!
• September 15, 2024Personal RecommendationsI Tested Bvlgari Mon Jasmin Noir L’Eau Exquise and the Results Were Absolutely Exquisite!
• September 15, 2024Personal RecommendationsI Tested the Best Linen Blouses for Ladies and Here’s What I Found!
• September 15, 2024Personal RecommendationsI Tested the Extra Long Extendable Dog Lead and Here’s Why It’s a Game Changer for Pet Owners!